Meyer Sound DS-4P Self-Powered Mid-Bass Reinforcement Loudspeaker 2x12" - USED

Only one left! Save $500.00Used

This product backed with 30-days warranty.

If you have any question please chat with us or call us at (514) 780-0648


Price:
Sale price$1,000.00 Regular price$1,500.00

Description

The self-powered DS-4P is an arrayable mid-bass loudspeaker system that provides high power sound reinforcement with extremely low distortion. It was developed to supplement the 70-200Hz band in full-range systems, affording additional mid-bass headroom. The DS-4P is most effective when used in multiples within an array, and easily can be incorporated into conventionally powered or self-powered systems. The DS-4P uses two 12-inch cone drivers in a true horn enclosure. The horn’s flare provides maximum energy transfer in the mid-bands with minimum frequency response ripple.

Like all Meyer self-powered loudspeaker systems, the DS-4P exhibits superior performance across virtually all parameters. Because the amplifier and control electronics are optimized for the drivers, the system is able to produce more power with a flatter response and lower distortion. The selfpowered concept simplifies installation, and eliminates amplifier racks and external drive processing. The DS-4P incorporates a two-channel Class AB/H power amplifier, Meyer Sound’s proprietary phase-corrected active processing circuits, and driver protection voltage limiters to ensure exceptional performance and reliability.

A laser-trimmed differential input stage affords superior common-mode rejection to allow signal runs through a simple twisted pair cable. Rear panel LEDs indicate AC power and driver protection limiting. The DS-4P’s integral power supply suppresses high voltage transients and incorporates the Intelligent ACTM system. This automates voltage selection, allowing worldwide operation, and additionally provides EMI filtering, soft current turn-on, and surge suppression. Installation of this unit is as simple as providing power and an audio signal source. Servicing in the field is facilitated by the modular design; the entire power amplifier module can be accessed and replaced, if necessary.

The rugged cabinet is coated with a textured black finish (carpet covering is an option) for durability and ease of handling. The DS-4P comes standard with six aircraft pan fittings (ring and stud), three on the top and three on the bottom of the enclosure. L-Track rigging can be fitted as an option. Also available is a variety of hanging and arraying hardware to create a complete system. The DS-4P easily integrates with the Remote Monitoring SystemTM (RMS) network and software application. Windows-based RMS displays signal and power levels, driver and cooling fan status, limiter activity, and amplifier temperature for all networked loudspeakers.

Frequency Response ±4 dB from 70 Hz to 200 Hz
Phase Response ±70° from 70 Hz to 200 Hz
Maximum SPL >142 dB SPL peak@1 meter
Dynamic Range >120 dB
(-6 dB points) 120°H; 120°V
Low Frequency (2) MS-12 12-inch cone drivers
Type 10kΩ impedance, electronically balanced
Connector XLR (A-3) male and female
Nominal Input Level +4 dBu
Type Complementary power MOSFET output stages (audio class AB/H)
Burst Capability 1240 watts (620 watts/channel)3
THD, IM, TIM <.02 %
Connector 250V NEMA L6-20P (twistlock) inlet or IEC 309 male inlet
Automatic Voltage Selection 95-125 VAC and 208-235 VAC; 50/60 Hz4
Operational Voltage Range Turn on: 85 VAC; Turn off: 134 VAC; 50/60 Hz Turn on: 165 VAC; Turn off: 264 VAC; 50/60 Hz
Dimensions Height: 36"; Width: 21.25"; Depth: 30"
Weight 163 lbs (74 kg); shipping: 187 lbs (85 kg)
Enclosure Multi-ply hardwood
Finish Black textured
Protective Grill Perforated steel grill, charcoal-grey foam
Rigging Six aircraft pan fittings (three on top and bottom). Working load for each fitting is 600 lbs (273 kg) based on a 5:1 safety factor with a straight tensile pull. Optional L-Track rigging system: Working load at vertical pull using any two points is 1500 lbs (682 kg) based on a 5:1 safety factor.

Online Financing

Payment & Security

American Express Apple Pay Diners Club Discover Google Pay Mastercard PayPal Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Estimate shipping

You may also like

Recently viewed