Crestron MP2E Integrated AV Control System w/ Ethernet #2513 - USED

Only one left! Save $105.00Used

This product backed with 30-days warranty.
Get Free Delivery on most orders over $200

If you have any question please chat with us or call us at (514) 780-0648

Sale price$44.99 Regular price$149.99


The MP2E combines an Ethernet control system and audio/video switcher in a single box to provide a cost-effective total room control solution.

4x2 Video Switcher

The high-bandwidth 4x2 video crosspoint switcher distributes video from four composite sources to two destinations great for displaying one source on a plasma display while previewing another on a Crestron touchpanel. Alternatively, the switcher may be configured as a 2X1 S-Video switcher. Built-in video-sensing on each input can be used to provide device power status information to the control system, and to detect signal presence for auto-switching.

The video routing capabilities of the MP2E can be extended by adding the C2N-MMS S-Video/RGBHV matrix switcher.

7x1 Audio Switcher/Processor

The 7x1 audio switcher provides balanced and unbalanced inputs for seven stereo audio sources. Built-in volume, bass, treble and mute controls and a 6-band graphic/parametric equalizer allow for precise adjustment and complete control of the audio signal. All audio settings and presets may be recalled and controlled from a Crestron touchpanel, keypad or other user interface. Crestron's Digital Media Tools (DMT) software provides the installer with a simple utility for setting input levels and equalization settings. 

Cresnet Slave Mode

Selectable Cresnet Slave Mode enables the MP2E to be configured as a Cresnet slave device, effectively transforming it into a Cresnet expansion module. Such flexibility can offer a cost-effective solution for system expansion, providing a host of additional control ports in a single module.


Crestron pioneered the IP-based control system to harness the vast possibilities of Ethernet and the Internet for remote control, monitoring, programming, and diagnostics. The MP2E is designed to deliver the world's most advanced IP control solution with full-duplex 10/100 Ethernet, built-in Web server and email client, and support for both static and dynamic IP addressing.


Built-in SNMP support enables network management of Crestron control systems using third-party SNMP software. As an alternate or supplement to RoomView, SNMP allows full control and monitoring from the IT Help Desk or NOC in a format that's familiar to IT personnel.


All Ethernet-enabled 2-Series control systems support SSL (Secure Sockets Layer), the industry standard for protecting sensitive network communications.

IR Wireless Option

When equipped with an optional CNXRMIRD IR receiver, the MP2E provides a low-cost wireless control solution using any Crestron IR wireless touchpanel, or a third-party universal IR remote.

Key Features

  • 2-Series engine | Dual-bus architecture
  • Integrated AV Switcher/Processor
  • Cresnet port - master/slave selectable
  • 10/100 Ethernet | SSL encryption
  • e-Control 2 and RoomView enabled | SNMP support
  • 2 Com ports (RS-232/422/485)
  • 4 IR/serial ports
  • 4 Versiport I/O ports
  • 4 Low-voltage relay ports
  • IR wireless compatible using CNXRMIRD
  • Single-space EIA rack-mountable
  NVRAM 256 KB
  Flash 4 MB
Operating System
  Real-time, preemptive, multitasking kernel, multi-threaded; FAT32 file system with long names; supports SIMPL Windows™ and SIMPL+®
  10/100BaseT, static IP or DHCP/DNS, SSL, auto-negotiating, full duplex TCP/IP, UDP/IP, CIP, SMTP, SNMP, built-in Web server and e-mail client; supports Crestron e-Control®2 XPanel and RoomView™ applications
  Switcher 4x2 composite matrix switcher or 2x1 Y/C (S-Video) switcher
  Bandwidth 100MHz minimum
  Crosstalk -60dB
  Features 7x1 stereo audio switcher, digital parametric and/or graphic equalizer
  Master Volume -80dB to +20dB, 1dB steps
  Input Compensation ±10dB, 0.1dB steps from DMT, 0.2dB steps from SIMPL
  Bass Gain Range ±15dB @ 100Hz, 0.5dB steps
  Treble Gain Range ±15dB @ 10kHz, 0.5dB steps
  Equalization Modes 6-band parametric;
3-band graphic + 3-band parametric;
5-band graphic + 1-band parametric;
5-band graphic + 1-band parametric (speech-optimized)
  PEQ Filter Gain ±12dB, 0.01dB steps from DMT; +24/-36dB, 0.1dB steps from SIMPL
  PEQ Filter Bandwidth 0.02 to 2.0 octaves (1.0 to 3.0 for shelving) from DMT, 0.02 to 3.5 octaves from SIMPL, 0.01 octave steps
  PEQ Filter Center Frequency 25Hz to 19.9kHz from DMT; 5Hz to 24KHz from SIMPL, 1Hz steps
  PEQ Filter Types low pass, high pass, EQ filter (peaking/notching), bass shelf, and treble shelf
  GEQ Filter Gain ±12dB from DMT, ±10dB from SIMPL, 0.1dB steps
  GEQ Filter Center Frequencies 63Hz, 250Hz, 1kHz, 4kHz, 10kHz (5-band);
160Hz, 600Hz, 1kHz, 2.5kHz, 5kHz (5-band speech);
250Hz, 1kHz, 4kHz (3-band)
  Frequency Response 20Hz to 20kHz +0/-0.5 dB
  THD+N <0.005% at 1kHz, A-weighted, maximum input/output
  S/N Ratio >97 dB, 20Hz to 20kHz A-weighted
  Channel Separation >100dB at 1kHz;
90dB 20Hz to 20kHz
  Crosstalk > -90dB 20Hz to 20kHz
  Common Mode Rejection >85dB 20Hz to 20kHz
Connectors – Video
  VIDEO IN 1 - 4 (4) BNC female comprising (4) composite or (2) S-Video inputs;
Input Impedance: 75 ohms;
Discrete video sensing on each input
  VIDEO OUT 1 - 2 (2) BNC female comprising (2) composite or (1) S-Video outputs;
Output Impedance: 75 ohm
Connectors – Audio
  AUDIO IN 1 - 2 (2) 5-pin 3.5mm detachable terminal blocks comprising (2) balanced/unbalanced stereo line-level inputs;
Input Impedance: 15k ohms balanced, 10k ohms unbalanced;
Maximum Input Level: 4 Vrms balanced, 2 Vrms unbalanced
  AUDIO IN 3 - 7 (5) 3-pin 3.5mm detachable terminal blocks comprising (5) unbalanced stereo line-level inputs;
Input Impedance: 10k ohms;
Maximum Input Level: 2 Vrms
  AUDIO OUT L/R (1) 5-pin 3.5mm detachable terminal block;
Balanced/unbalanced stereo line-level output;
Output Impedance: 200 ohms balanced, 100 ohms unbalanced;
Maximum Output Level: 3.6 Vrms balanced, 1.8 Vrms unbalanced
Connectors – Control & Power
  COM A - B (2) DB9 male, bidirectional RS-232/422/485 ports;
Up to 115.2k baud;
Hardware and software handshaking support;
All ports support C2N-NPA8 Network Poll Accelerator
  IR SERIAL OUT A - D (4) 2-pin 3.5mm detachable terminal blocks;
IR/Serial output ports;
IR output up to 1.2 MHz;
1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud;
Individual signal generator per port, allowing simultaneous firing of all ports
  I/O Versiports 1 - 4 (1) 5-pin 3.5mm detachable terminal block comprising (4) digital input/output or analog input ports (referenced to GND);
Digital Input: Rated for 0-24 Volts DC, input impedance 20k ohms, logic threshold 1.24 Volts DC;
Digital Output: 250mA sink from maximum 24 Volts DC, catch diodes for use with “real world” loads;
Analog Input: Rated for 0-10 Volts DC, protected to 24 Volts DC maximum, input impedance 20k ohms;
Programmable 5 Volts, 2k ohms pull-up resistor per pin
  RELAY OUTPUT 1 - 4 (1) 8-pin 3.5mm detachable terminal block comprising (4) normally open, isolated relays;
Rated 1 Amp, 30 Volts AC/DC;
MOV arc suppression across contacts
  IR IN (1) 3-pin 3.5mm detachable terminal block;
For connection of the CNXRMIRD IR Receiver (sold separately);
Allows IR wireless control from Crestron or third-party remotes using RC-5 IR commands
  LAN (1) 8-wire RJ45 with 2 LED indicators;
10/100BaseT Ethernet port;
Green LED indicates link status;
Yellow LED indicates Ethernet activity
  COMPUTER (1) DB9 female, RS-232 computer console port
  NET (1) 4-pin 3.5mm detachable terminal block;
Cresnet port, Master/Slave selectable;
Expandable via C2N-NPA8 Network Poll Accelerator
  24VDC (1) 2.1mm barrel DC power jack, 24 Volt DC power input
(PW-2420RU power pack included)
Passes through to NET port to power Cresnet devices
  Ground (1) 6-32 screw, chassis ground lug
Reset Buttons
  HW-R Hardware reset (reboots the control system)
  SW-R Software reset (restarts the SIMPL program)
LED Indicators
  PWR (1 green) Indicates DC power supplied to unit
  NET (1 yellow) Indicates Cresnet bus activity
  MSG (1 red) Indicates control system has generated an error message
  LNK (1 red) Indicates a valid connection on LAN port
  ACT (1 red) Indicates activity on LAN port
Power Requirements
  Power Pack 2.0 Amps @ 24 Volts DC;
100-240 Volts AC, 50/60 Hz power pack, model PW-2420RU included
  Available Cresnet Power 30 Watts using PW-2420RU power pack (included)
  Cresnet Power Usage 18 Watts (0.75 Amp @ 24 Volts DC) usinf Cresnet network power (no power pack connected to the 24VDC connector)

Online Financing

Payment & Security

American Express Apple Pay Diners Club Discover Google Pay Mastercard PayPal Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Estimate shipping

You may also like

Recently viewed