Description
The CP2E is a compact Ethernet control system designed for small to medium sized residential and commercial control applications. Three built-in COM ports, eight IR/Serial ports, eight I/O Versiports, eight isolated relays, and Ethernet provide for control of video projectors, plasma displays, switchers, DVD players, screens, lifts, and much more. Additional control ports may be added using Cresnet expansion modules, or by "slaving" additional control processors such as the CP2.
Key Features
- 2-Series engine | Dual-bus architecture
- Cresnet port - master/slave selectable
- 10/100 Ethernet | SSL encryption
- e-Control 2 and RoomView enabled | SNMP support
- 3 Com ports (RS-232/422/485)
- 8 IR/serial ports
- 8 Versiport I/O ports
- 8 Low-voltage relay ports
- Single-space EIA rack-mountable
| Processor | ||
| CPU | 32-bit Freescale ColdFire® Microprocessor | |
| Memory | ||
| SDRAM | 32 MB | |
| NVRAM | 256 KB | |
| Flash | 4 MB | |
| Operating System | ||
| Real-time, preemptive multi-threaded/multitasking kernel; FAT32 file system with long names; supports SIMPL™ Windows® and SIMPL+® | ||
| Ethernet | ||
| 10/100BaseT, auto-negotiating, full/half duplex, static IP or DHCP/DNS, SSL, TCP/IP, UDP/IP, CIP, SMTP, SNMP, built-in Web server and e-mail client; supports Crestron e-Control®2 XPanel and RoomView™ applications | ||
| Connectors | ||
| COM A - C | (3) DB9 male, bidirectional RS-232/422/485 ports; Up to 115.2k baud; Hardware and software handshaking support; All ports support C2N-NPA8 Network Poll Accelerator |
|
| INFRARED-SERIAL OUTPUT A - H | (8) 2-pin 3.5mm detachable terminal blocks, IR/Serial output ports; IR output up to 1.2 MHz; 1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud; Individual signal generator per port, allowing simultaneous firing of all ports |
|
| I/O Versiports 1 - 8 | (1) 9-pin 3.5mm detachable terminal block comprising (8) digital input/output or analog input ports (referenced to GND); Digital Input: Rated for 0-24 Volts DC, input impedance 20k ohms, logic threshold 1.24 Volts DC; Digital Output: 250mA sink from maximum 24 Volts DC, catch diodes for use with “real world” loads; Analog Input: Rated for 0-10 Volts DC, protected to 24 Volts DC maximum, input impedance 20k ohms; Programmable 5 Volts, 2k ohms pull-up resistor per pin |
|
| RELAY OUTPUT 1 - 8 | (2) 8-pin 3.5mm detachable terminal blocks comprising (8) normally open, isolated relays; Rated 1 Amp, 30 Volts AC/DC; MOV arc suppression across contacts |
|
| LAN | (1) 8-wire RJ45 with 2 LED indicators; 10/100BaseT Ethernet port; Green LED indicates link status; Yellow LED indicates Ethernet activity |
|
| COMPUTER | (1) DB9 female, RS-232 computer console port | |
| NET | (1) 4-pin 5mm detachable terminal block; Cresnet port, Master/Slave selectable; Expandable via C2N-NPA8 Network Poll Accelerator |
|
| 24VDC | (1) 2.1mm barrel DC power jack, 24 Volt DC power input; (PW-2420RU power supply sold separately); Passes through to NET port to power Cresnet devices |
|
| Reset Buttons | ||
| HW-R | Hardware reset (reboots the control system) | |
| SW-R | Software reset (restarts the SIMPL program) | |
| LED Indicators | ||
| PWR | (1 green) Indicates DC power supplied to unit | |
| NET | (1 yellow) Indicates Cresnet bus activity | |
| MSG | (1 red) Indicates control system has generated an error message | |
| LNK | (1 red) Indicates a valid connection on LAN port | |
| ACT | (1 red) Indicates activity on LAN port | |
| Power Requirements | ||
| 24 Watts (1 Amp) @ 24 Volts DC (PW-2420RU power supply sold separately) | ||
| Available Cresnet Power | 26 Watts using PW-2420RU (sold separately) | |
| Cresnet Power Usage | 24 Watts (1 Amp @ 24 Volts DC) with no power supply connected to the 24VDC connector | |
| Environmental | ||
| Temperature | 41° to 113°F (5° to 45°C) | |
| Humidity | 10% to 90% RH (non-condensing) | |
| Enclosure | ||
| Chassis | Steel, black matte powder coat finish | |
| Faceplate | Extruded aluminum, black matte powder coat finish with polycarbonate label overlay | |
| Mounting | Freestanding or 1U 19-inch rack-mountable (adhesive feet and rack ears included) | |
| Dimensions | ||
| Height | 1.80 in (4.57 cm); 1.70 in (4.32 cm) without feet |
|
| Width | 17.03 in (43.24 cm); 19.0 in (48.26 cm) with ears |
|
| Depth | 6.66 in (16.91 cm) | |
| Weight | ||
| 3.54 lbs (1.59 kg) | ||
Online Financing
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.